Don't expect here a full-blown course on high-school algebra; it cannot be done, not in such limited space. These are just the bare bones--just three basic ideas and rules for handling relations ("equations") involving **unknown quantities** whose values you are trying to find.

Until the multiplication is carried out, we may represent the answer by some letter, usually *x*, and write

One can then say "*x* stands for the **unknown quantity**". The fundamental idea of algebra is very simple:

**The unknown quantity ***x* is a number like any other. It may be added, subtracted, divided or multiplied in any way appropriate for ordinary numbers.

A mathematical relationship involving known numbers (like 25 or 40) and unknown ones (like *x*) is known as an **equation**. Often *x* is not given as cleanly as above, but is buried inside some complicated expression. To get a solution, one must replace the given equation (or equations) with others, containing the same information but cleaner in appearance. The final goal is to **isolate** the unknown, to make it stand apart ("isola" is island in Italian), to bring the equation to the above form, namely

**x = (expression containing only known numbers)**

Once that form is reached, the number which *x* represents can be quickly calculated.

For instance:

**"What is the number which, if you double it,
then add 5 and divide the sum by 3, you get 3?"**

Call that number *x*. The information stated here in words can also be written down in equation form:

(2*x* + 5)*/*3 = 3

Parentheses here enclose quantities handled like a single number, and 2x means "2 times *x.*" In algebra, **symbols** (or parentheses) **standing next to each other** are understood to be **multiplied**. If you stick to this rule, you will never be confused by the similarity between the letter *x* and the multiplication sign. Computer programs, by the way, often represent multiplication by the asterisk *, placed a little lower than here.

**If you have an equation and modify both its sides in ***exactly the same way,* what you get is *also* a valid equation.

You may **add**, **subtract**, **multiply** or **divide** any number you wish; as long as it's done equally to both sides of the equality, the result is still valid. Also, the new equation still contains the same information as before. (But don't multiply both sides by 0 and get 0 = 0 ; the result **is** correct, but all your information has now vanished into thin air.)

For example, the equation given earlier:

(2*x* + 5*)/*3 = 3

Multiply both sides by 3:

(2*x* + 5) = 9

Subtract 5 from both sides:

2*x* = 9 – 5 = 4

Divide both sides by 2:

*x* = 4*/*2 = 2

and you have the result, *x* = 2. High school algebra contains a good deal more, but the above simple rules, plus the basic goal "isolate the unknown number," will get you a long way.

One last step in the calculation is frequently skipped, but should *not* be. **Just to make sure** you haven't made a mistake along the way, take the **original** equation

(2*x* + 5)*/*3 = 3
replace in it the unknown quantity *x* by the value you have derived--in this case, by the number 2--and check whether the two sides are indeed equal. If they are, you can rest assured that your answer is correct.

A third element is **substitution**:

**If you know that an unknown quantity or expression can be expressed in a different way, you may substitute in its place the alternative way of expressing it. This gives a new equation, which sometimes leads to the solution.**

Suppose you have two unknown quantities, **x** and **y**, and two equations linking them (two are needed to get a unique solution--with just one, an infinite number of pairs of **x** and **y** may exist that satisfy it):

**x + 2y = 7 ** (1)

**2x + y = 5 ** (2)

Subtract **2y** from both sides of (1):

**x = 7 – 2y ** (3)

and substitute this for **x** in (2)

**2(7 – 2y) + y = 5 **

Then
**14 – 4y + y = 5 **
Subtract 14
** – 4y + y = 5 –14 **

**–3y = –9 **
Multiply both sides by (–1)
**3y = 9 **

** y = 3 **
Then from (3)

** x = 7 – 2y = 7 – 6 = 1**
As a final test, put **x=1, y=3** in equations (1) and (2) and make sure that these solutions indeed satisfy the requirement. If they don't you probably made a mistake somewhere along the way.

**Another type of substitution**, namely substituting entire equations, is postponed to the end of section (M-3), which is about **formulas**.